Analisis Ergonomi Stasiun Kerja Menggunakan Metode Quick Exposure Checklist (QEC) Pada PT. Rimba Kencana Abadi

Muhammad Dwi Restu Keliat Erwandi; Yusnawati

doi:10.55377/jis.v7i1.14499

Muhammad Dwi Restu Keliat Erwandi Universitas Samudra
Yusnawati

DOI: https://doi.org/10.55377/jis.v7i1.14499

Kata Kunci: Ergonomics, Musculoskeletal Disorders, Quick Exposure Checklist, Wood Industry, Workstation

Abstrak

This internship research was conducted at PT. Rimba Kencana Abadi, a wood manufacturing company producing veneer, plywood, and sawmill products. This study aims to analyze ergonomic risk levels at several workstations using the Quick Exposure Checklist (QEC) method. Data were collected through direct observation and questionnaires distributed to workers at 12 workstations. The results showed that most workstations had moderate to high ergonomic risk levels, with exposure levels above 50% and reaching more than 90% in several work areas such as wood unloading and cutting stations. The most common complaints experienced by workers were back pain, neck pain, and wrist discomfort. Therefore, ergonomic improvements such as workstation redesign, lifting aids, and proper work posture training are recommended to reduce musculoskeletal disorder risks and improve work productivity.

Referensi

[1] M. Aldyirwansyah, Y. Windusari, N. A. Fajar, and N. Novrikasari, “Pengaruh Penerapan Keselamatan dan Kesehatan Kerja (K3) dengan Kinerja Pekerja: Systematic Literature Review,” J. Keperawatan, vol. 15, no. 4, pp. 63–68, 2023, doi: 10.32583/keperawatan.v15i4.1937.
[2] R. A. M. Puteri and Z. N. K. Sukarna, “Analisis Beban Kerja Dengan Menggunakan Metode Cvl Dan Nasa-Tlx Di Pt. Abc,” Spektrum Ind., vol. 15, no. 2, p. 211, 2017, doi: 10.12928/si.v15i2.7554.
[3] L. E. Richter, A. Carlos, and D. M. Beber, Dasar Dasar pengetahuan Ergonomi. Malang, 2017.
[4] M. Andriani, “Identifikasi Postur Kerja Secara Ergonomi Untuk,” Semin. Nas. Tek. Ind., pp. 9–14, 2017.
[5] D. Herdhiansyah, R. Reza, S. Sakir, and A. Asriani, “Kajian Proses Pengolahan Tahu: Studi Kasus Industri Tahu Di Kecamatan Kabangka Kabupaten Muna,” Agritech J. Fak. Pertan. Univ. Muhammadiyah Purwokerto, vol. 24, no. 2, p. 231, 2022, doi: 10.30595/agritech.v24i2.13375.
[6] S. Nurdiana, S. Arijanto, J. T. Industri, F. T. Industri, and I. T. Nasional, “USULAN PERBAIKAN POSTUR KERJA DENGAN METODE QUICK EXPOSURE CHECK ( QEC ) DI MOCHI X,” 2023.
[7] A. Ispăsoiu, I. Milosan, D. Senchetru, T. Machedon-Pisu, A. M. F. Ispăsoiu, and C. Meiţă, “Study on the application of the QEC (Quick Exposure Check) on the ergonomic risks assessment in the industrial field,” MATEC Web Conf., vol. 343, p. 10023, 2021, doi: 10.1051/matecconf/202134310023.
[8] S. Kasus and P. T. Petrokimia, “Analisis Ergonomi Operator Crane : Penerapan Metode REBA Dan QEC Untuk Mengurangi Risiko Cedera,” vol. 3, no. 4, pp. 368–382, 2024.
[9] T. S. Nova and N. L. P. Hariastuti, “Analysis of Occupational Safety and Health Risk Using the HAZOPS Method and ergonomics Approach (RULA and REBA) at UD. Sekar Surabaya,” J. SENOPATI Sustain. Ergon. Optim. Appl. Ind. Eng., vol. 3, no. 2, pp. 63–73, 2022, doi: 10.31284/j.senopati.2022.v3i2.2382.
[10] F. A. Subakti and A. Subhan, “Analisis Ergonomi Stasion Kerja Menggunakan Metode Quick Exposure Checklist Pada PT. Sama-Altanmiah Engineering,” J. Media Tek. dan Sist. Ind., vol. 5, no. 1, p. 55, 2021, doi: 10.35194/jmtsi.v5i1.1307.
[11] N. Hudaningsih, D. Rahman, I. Ahmad Jumari, and Fazriansyah, “Analisis Postur Kerja Pada Saat Mengganti Oli Mobil Dengan Menggunakan Metode Rapid Upper Limb Assessment (Rula) Dan Rapid Entire Body Assessment (Reba) Di Bengkel Barokah Mandiri,” J. Ind. Teknol. Samawa, vol. 2, no. 1, pp. 6–10, 2021, doi: 10.36761/jitsa.v2i1.1018.
[12] J. Purnama, E. P. Putri, A. Halik, D. N. Idraki, and D. A. M. Andris, “Inovasi Alat Mesin Kayu Yang Ergonomis Untuk Meningkatkan Output Produksi Pada Ukm Furniture,” JPM17 J. Pengabdi. Masy., vol. 7, no. 1, pp. 01–08, 2021, doi: 10.30996/jpm17.v7i1.6032.